Randomly generated dungeons are a great way to quickly build an improvised dungeon delving session or solo gaming activity for any Table Top Roleplaying Game or Dungeon Crawl Board Game.
Düngen is a very quick and easy to use random dungeon generator, build from Planström Dungeon Floor Plan System, and 100% compatible with Kosmoström Science Fiction Floor Plan System.
Düngen is designed to supplement a ruleset that covers combat and random encounters, such as Dungeons & Dragons, Fighting Fantasy, HeroQuest and is not a complete game in its own right.
Step Zero - Preparation
Firstly download and print
Planström Dungeon Floorplans System Set 1 Alternatively if you prefer a Science Fiction setting, then consider using
Kosmostrom Science Fiction Floorplans System.
Düngen also requires the use of a 4 sided dice or D4.
A recommended starter set may be:
- 2 sheets of 1A Rooms
- 2 sheets of 1B Corridor
- 1 sheet of 1C Doors
Then cut these into various sized rectangles.
- Corridors should be no wider than 2 squares, and no shorter than 5 squares.
- Rooms should be a minimum of 3x3 squares.
- Doors are individual 25mm x 12.5mm tiles.
You will find
Planström gives you a good variety of shapes and sizes.
Different coloured transparent folders makes it easy to select the correct set of tiles when required. Once your Planström is prepared for use, and you have a 4 sided dice, you can begin to generate a Düngen.
Step One - Place a Room
Without looking into the container or trying to guess or feel which tile you may have, take one Room tile and place it in the centre of the table. If this is the first Room of the dungeon and you have
Planström Floorplan System Set 2: Sheet 2B Stairs, to hand then you may add a spiral staircase in one corner to indicate the
Düngen exit if you wish.
Step Two - Place Doors
Now it is time to discover how many Doors the room has.
Roll and drop one D4 (4 sided dice) onto the middle of the Room tile.
- The number indicates how many Doors this Room has.
- The corners of the base triangle point to where the Doors should be located along each wall.
Take the required number of Doors from the sleeve, and place them on the outside of the Room tile as indicated by the dice position. On the roll of a 4, choose one opposing side to indicate the location of the 4th Door, always favouring the wall
opposite the entrance. On the roll is a 1 there is only a single entrance door.
In the example above, a 2 was rolled, so two doors were placed as indicated by the dice.
Planström Dungeon Floorplan System: Set 1 provides you with several varieties of Doors:
- Open
- Weak Wooden Door
- Strong Wooden Door
- Solid Metal Door
- Portcullis
These may be given appropriate rules using your chosen Role Playing Game or dungeon crawl rules. If your prefered system is lacking such a feature, each type can be assigned a target number from 1-6 which must be rolled under in order to open successfully.
Step Three - Encountering the space
Once a Player Character enters the Room or has line of sight into the Room, it is time to decide what is in the Room. Your preferred rules-set may already have a system for determining this, however a simple system for determining the contents in a room is provided here for your convenience:
Roll a D4 with the following results:
- Empty. The room is empty - although any rules for searching for hidden features may still apply.
- Furnished: If you have a copy of Planström Floorplan System Set 2: Furniture and Stairs randomly take an item of dungeon furniture and place it in the room. Look out for exciting and useful descriptions of Dungeon Furniture in a future [ZHU] Industries product. Otherwise use the random treasure / item / trap from the ruleset you are using.
- Inhabited. Use the random monster rules from whatever ruleset you are using.
- Inhabited & Furnished. Use both 2 & 3 above.
In our example, we rolled a 3, and then determined that the room was
inhabited by an Orc using the Wandering Monsters rules form
Fighting Fantasy, represented by a vintage 1980s Citadel
ME51 Orc of the Red Eye miniature.
Our stoutharted Dwarven adventurer, Forrin Wokeupinashed, represented here by a vintage 1980s
ME-82 'The Hobbit' Personalities Thorin Oakenshield miniature enters the Room. Combat ensues, and was resolved using the
Fighting Fantasy rules.
Forrin eventually defeats the Orc, and pockets 4 Gold Pieces (determined using the Treasure tables from
Fighting Fantasy: Out of the Pit) . Forrin then moves to the door and using the
Fighting Fantasy door rules, opened the portcullis, and exited the Room.
Step Four: Place a Corridor
Once a Player Character has managed to open a Door, and is about to exit a Room, select Corridor tile at random. This should usually be placed pointing away from the Room, with the short edge connecting to the Door. However, if the Düngen has sprawled towards the edge of the table, the Corridor may be placed parallel to the door, near the mid-point of the long edge.
Step Five: Place Doors
As with a Room, a D4 is thrown to determine how many Doors there are and where they are located. A Corridor will naturally always have one Door, so a roll of 1 means the Corridor only has a single additional door immediately opposite the entry door.
 |
| Dice Drop on Corridor |
Any number greater than one will have the doors position indicated by the corners of the D4.
In our example Forrin roles a 3, so 3 doors are picked and placed as so:
 |
| Placing the Doors |
Once any Corridor rules have been applied, and any Door obstacles resolved, we return to Step One: Placing a Room, placing the Room as centrally as possible.
Resolving Spatial Conflicts
As a
Düngen is being randomly generated, doubtless tiles. If a selected Room or Corridor cannot be fitted into the open space, select another Room or Corridor tile until one is found that can. Be sure to shuffle when placing these tiles back into their containers.
Occasionally no available Room or Corridor will fit into a given space. Some suggestions follow:
- Place the Corridor parallel to the Door.
- Cut down a Room or Corridor tile to fit.
- Consider the Door a cupboard, place an Open Door behind it.
- Door is a teleporting Portal
- Door leads to a collapsed or caved-in section.
In order to avoid conflicts and overlaps in the first place:
- Whenever possible, place Doors on walls opposite from already constructed areas.
- Allow Doors to reconnect to old Rooms and Corridors as Secret Doors that have been found.
- Allow Corridors to have blocked ends
Saving the Düngen
 |
| Düngen: The Adventure Never Ends |
Once a game session is finished, you can simply photograph (
#düngen #planström) or draw the resulting layout on a sheet of graph paper in order to record it. Once recorded you will be able to recreate the
Düngen layout and continue the adventure in a future session. Alternatively you may consider that Ike Eyah the Mad Wizard who controls the
Düngen has fallen asleep and his magical architecture rearranges itself every time a group of vagabond adventurers seek to defeat his forbidden domain.
